The truth is, probably because you are a lousy skater. You haven’t practiced
enough, this video will help you learn the basics of turning on your skateboard.
There is nothing more frustrating than trying to do a trick on your skateboard and having it not turn the way you want it to. So why won’t your skateboard turn? In this blog post, we will take a look at some of the reasons why your skateboard might not be turning properly and how to fix them. Stay tuned!
There are a few different reasons why your skateboard might not be turning the way you want it to. One of the most common reasons is that your trucks are not tightened properly. When your trucks are not tight enough, they will cause your wheels to wobble and will make it difficult for you to turn.
Why won’t my skateboard turn?
If you’re having trouble getting your skateboard to turn, it could be because of a few different things.
- First, check to make sure that your trucks are properly adjusted. The trucks are the part of the skateboard that attach the wheels to the deck, and they can be adjusted to make the skateboard more or less responsive to turning. If they’re too loose, the skateboard will be hard to turn; if they’re too tight, it will be even harder.
There are a few other things that could be causing your skateboard to resist turning. One possibility is that the bearings in your wheels are gunked up with dirt and grime. This can happen if you don’t clean your bearings regularly, and it can make turning much more difficult.
- Another possibility is that your wheels are too hard; if they’re too hard, they won’t have enough grip on the pavement to allow you to turn easily.
- using the wrong technique. When you want to turn, you need to push down on the tail of the skateboard with your back foot while simultaneously turning your front foot in the direction you want to go. If you’re not doing both of these things at the same time, it will be very difficult to turn.
- Finally, it’s possible that you’re just not used to skateboarding yet. It takes a little bit of practice to get the hang of turning, so don’t get too frustrated if it’s not happening right away. Just keep at it and you’ll eventually get the hang of it!
How do you loosen a skateboard so it turns?
If you’re a skateboarder, then you know that one of the most important aspects of the sport is being able to make your skateboard turn. After all, what’s the point of skating if you can’t even do tricks or ride around corners? Loosening your skateboard so it turns is essential to becoming a good skater.
There are a few different ways that you can loosen your skateboard so it turns.
1. First, you can try adjusting the trucks. The trucks are the metal parts of the skateboard that the wheels are attached to. By loosening the screws on the trucks, you can make the skateboard turn more easily. Just be careful not to loosen them too much, or else the skateboard will be too loose and unstable.
2. Another way to make your skateboard turn more easily is to adjust the kingpin. The kingpin is a small metal rod that goes through the center of the truck. By loosening the kingpin, you can make the trucks turn more easily. Just be careful not to loosen it too much, or else the skateboard will be too loose and unstable.
3. Finally, you can try changing the wheels. Some skateboarders prefer softer wheels, which make the skateboard turn more easily. Others prefer harder wheels, which make the skateboard turn less easily. It’s really up to you what kind of wheels you prefer. You can experiment with different kinds to see what works best for you.
No matter which method you choose, just remember to not make your skateboard too loose. Otherwise, it will be unstable and dangerous to ride. Be careful, and have fun!
Why is your Skateboard not going straight?
If you’re having trouble keeping your skateboard going straight, it could be due to a number of different factors. Here are some of the most common reasons why your skateboard might not be traveling in a straight line:
1. Your wheels are not aligned properly.
If your wheels are not pointing in the same direction, it will be very difficult to keep your skateboard going straight. Make sure that all four of your wheels are pointing in the same direction before you start skating.
2. You’re not leaning correctly.
If you’re leaning too far forward or backward on your skateboard, it will cause the board to veer off course. Try to keep your weight evenly distributed on the board and avoid leaning too far in either direction.
3. You’re not pushing evenly.
If you’re not pushing evenly with both feet, it will cause the skateboard to veer to one side or the other. Try to push evenly with both feet and keep your weight distributed evenly on the board.
4. The surface you’re skating on is uneven.
If you’re skating on a surface that is uneven, it will be very difficult to keep your skateboard going straight. Try to find a smooth, level surface to skate on before you start skating.
5. You’re not used to skating.
If you’re new to skating, it will take some time to get used to the feeling of riding a skateboard. Don’t get discouraged if you have trouble keeping your skateboard going straight at first – it takes practice!
If you’re having trouble keeping your skateboard going straight, try to identify the problem and make some adjustments. With a little practice, you’ll be skating in a straight line in no time!
What do you do when your skateboard won’t turn?
If your skateboard won’t turn, there are a few things you can do to try to fix the problem.
- If you’re having trouble turning your skateboard, the first thing you should do is check your trucks. To do this, loosen the kingpin nut and turn the truck’s baseplate until it’s at a 45 degree angle. If the trucks are still too tight, you can try adjusting the bushings. To do this, remove the washers from the top and bottom of the trucks, then use a Phillips head screwdriver to tighten or loosen the kingpin nut as needed.
- If your trucks are adjusted properly but you’re still having trouble turning, the next thing you should check is your wheels. Hard wheels will have a harder time gripping the ground and turning, so if you’re using hard wheels, you may want to try switching to softer wheels. You can also try spraying your wheels with WD-40 or another lubricant, which will help them grip the ground better.
- Finally, if your bearings are dirty or damaged, they may be causing your wheels to spin too slowly or not at all. To clean your bearings, you’ll need to remove them from your wheels and soak them in solvent for a few hours. Once they’re clean, dry them off and re-lubricate them with bearing grease before putting them back on your wheels.
If you’re still having trouble after trying all of these things, it’s time to consult a professional. Skateboarding is a complex sport and there are many factors that can affect your ability to turn. A professional skateboarder or skate shop employee can help you troubleshoot the problem and find a solution that works for you.
Conclusion
There are a few reasons why your skateboard might not turn. The first reason is that you might be using the wrong technique. To turn, you should shift your weight to the side of the board you want to turn on and use your feet to push off in that direction. If you’re still having trouble turning, it might be because your board is too stiff or because the bearings need to be lubricated. -If none of these solutions work, it’s possible that something is wrong with your skateboard and you’ll need to take it into a shop for repairs.