Many users prefer skateboards that are pre-assembled, after all, assembling skateboards can be a hassle in itself. Although, the market is full of various outstanding pre-assembled complete skateboards, and it may not be an easy task to choose amongst the best ones to find the right one for you.
Why are you here? What are you looking for?
darkstar skateboard reviews ?
elos skateboard reviews ?
zero skateboard reviews ?
deathwish skateboard reviews ?
goodwood skateboard reviews ?You are not going to find them here. In this review article I am going to share with you the 12 best skateboard brands that I believe you should take a serious look at if you are serious about upgrading to a quality pre-assembled board. Unfortunately, or fortunately for you zero, deathwish, goodwood, globe, darkstar, and kryptonics will not be reviewed, but I think you will be glad if read this article and learn why.
When you are no longer a beginner skateboarder and you are ready to upgrade the cheap skateboard you bought at Walmart, Target, Sam’s Club or wherever. This list includes the top skateboard brands in the world, and you will find the perfect new skateboard for you from the list below.
However, you need to understand the basics first: like opting for a complete skateboard even if you are a new beginner and eager to learn the skill, starting with a quality board is always a smart play. The more common scenario is buying a cheap Walmart type skateboard when you start, to see if this is a sport you are going to actively pursue and get serious about.
This try it to see if I like it approach, normally puts you in a situation where you end up with a skatebaord without the best of components. In fact, you can choose a decent option and upgrade its parts once you get the gist of riding and performing skateboard tricks. The bearings, trucks, deck, and wheels can all be replaced with high-quality products.
Many users prefer skateboards that are priorly assembled, after all, assembling skateboards is a hassle in itself. Although, the market is full of various outstanding pre-assembled complete boards, and it may not be an easy task to choose amongst the best ones.
However, you need to understand the basics first: like opting for a complete skateboard only if you are a beginner and eager to learn the skill. This will allow you to opt for a one without the best of components. In fact, you can choose a decent option and upgrade its parts once you get the gist of it. The bearings, trucks, deck, and wheels can all be replaced with high-quality products.
To ease your dilemma, we have devised a list of 12 best complete skateboards at affordable prices. These products can be easily found on Amazon.com and be delivered to your door within a couple of days.
Let us skim through the list!
1. CCS Complete Skateboard Review
CSS skateboards can serve as an alternative for the popular Mini Logo, given its extremely feasible price along with the manufacturing of the highest quality board. The testing of this board made me realize what a wonderful product it is, along with downsides.
This is quite a decent board, however cannot cater to greater beatings and might end up disappointing you. However, this does not indicate that it may happen immediately but with constant grinding for months, it can lead to breakage. After owning this board I can hands down vouch for it, as it provides a great value for less than a hundred bucks. I got days and days of enjoyment from this board and I road it hard.
The best part about this board is that it is budget-friendly and allows you to upgrade all its parts after wear and tear or any possible damage.
The skateboard has been manufactured using 100a skateboard wheels that are quite sturdy, making it more suitable for the skatepark genre. It consists of well fitted, non-fancy bearings to allow proper functioning, however, you are less likely to have a smooth ride.
This skateboard is available in a variety of sizes that range from 7.0 inches and can reach up to 8.0 inches. Anything width that is about 7.5 inches or less, is an ideal choice for kids, while anything above 8.0 inches is more appropriate for technical skaters.
In case you are searching for a better balance then, you can opt for custom parts or choose a basic set up for your convenience.
Key features of CCS Skateboard
- It has standard bearings
- It has to width range of 7.0 inches – 8.0 inches and above
- It comes with CCS truck set
- It has 100a hard wheels
- The deck is made up of 7 ply maple wood
- Deck width between 0 and 8.5″
2. Globe Complete Skateboard
It is hard to omit the popular Globe products which are famous for their pop, shape, and the durable decks. This complete is a great pick with Its 99p skateboard wheels that are about 53mm. It has Tensor trucks and a deck that is 7.75 inches wide.
The best part is that it is compliant with all technical ventures like grinding, sliding, ollies, and flipping tricks. In fact, if you are a professional rider, searching for a great deck board, then this top-quality product with Tensor trucks is available at a quite reasonable cost.
However, on the downside you may not be able to use it for commuting, given it’s 99a hard and study wheels. Additionally, the center provides an adjustable feature for the swapping of wheels with Spitfire and Bones, as per your liking and convenience. To top it off, this skating board will allow you to have a trouble-free skating experience in the parks and the street.
It has been manufactured using Standard Alloyed Tensor Trucks, which are among the top quality products. To add to it durability, these come with a manufacturer’s lifetime warranty Which makes it a top seller in my list.
Key Features of Globe Scateboard
- It has a 14-inch wheelbase
- It has 99a hard wheels
- It has an average deck length of 31.6 inches
- It consists of 7 standard ABEC bearings
- It has been Tensor trucks
3. Santa Cruz Complete Skateboard
Given the reputable brand Santa Cruz, you are bound to expect a decent product. My 13-year-old nephew has the same Santa Cruz skateboard which allowed me to discover it’s great cruising attributes. Without any hassle, you are easily able to hop on the curb and enjoy a smooth ride with its top quality and durable wheels.
For all those beginners out there, this Santa Claus setup is highly recommended to provide a more enjoyable experience. It is manufactured using bullet trucks which are quite decent, however not allow you to hold it onto it for long periods after several curbing and rail grinding.
Although, overall this board provides a comfortable experience and is quite reasonable for its cost. It is made up of top quality maple wood while providing sufficient pop.
In case, you are searching for a board with old school feel, the Santa Cruz can also provide you with tons of cruiser boards that can take you back to the 80s, all these cruiser boards are manufactured using high-quality components along with 3 Abec bearings and 78 slimeballs 60mm wheels on this skateboard for you to enjoy your retro adventures.
Key Features of Santa Cruz Skateboard
- It consists of shielded skateboard bearings that are not easy to clean.
- It is manufactured using a high-quality deck, made up of 7 ply maple wood
- It has 52mm wheels
- A complete cruising set
- Has Bullet trucks
4. Creature Fire Starter Complete Skateboard Review
This skateboard set up can be easily purchased in the $100 – $125 range. Its track quality is not to be much spoken about, however will not provide an inconvenience for any beginners. This board comes in a size of 7.75 inches, which is an ideal measurement to pull off all sorts of technical skateboard tricks.
This board consists of 52mm skatebaord wheels which work well enough for skateparks and on rough roads. In fact, please can you also help in providing you with sharper turns. However, you may not be quite impressed by its standard buildings which may often require lubrication for faster spinning. Alongside this, it consists of a concave to help maintain your field balance.
If you wish, you can also upgrade its bearings, wheels, and trucks with other alternatives once you are well familiar with it.
Key Features of Fire Starter Skateboard
- It has 52mm oj wheels
- Has a wheelbase of 14.22 inches
- Has a deck length of 31.6 inches
- Made up of hard rock maple wood, 7 ply deck
- Deck width: 7.75″
5. Element Complete Skateboard Review
Element has been producing remarkable skatboard merch like shirts and hats, and myself and many others are in love with their skateboards. They provide you with a complete setup for the deck made up of the top quality products – all at extremely affordable prices. There are no unknown wheels or truck brands, instead, Element made sure to put in all the product parts from their own manufacturing company.
Nevertheless, you can always opt for a different quality of products as per your convenience however it may be hard to do so in this possible range. Hands down, this is a great product without any complaints of wobbly trucks, non-spinning wheels, or wear and tear. In fact, I would consider it as a safe option for all cruisers.
The manufacturers have used 99a skateboard wheels, which are an ideal choice to perform multiple tracks and can easily function in parks and streets. To add more, these smooth skateboard wheels will not add to the noise pollution.
The darkest of remarkable quality allowing you to easily hold it up during pop ollies and flips. Although additional use of the skateboards for flipping and rough grinding can lead to a foster wearing down process which I guess is commen sense, right?
Key Features of this Skateboard
- It has shielded buildings
- It has 99a wheels
- It had a wheel length of 14.25 inches
- It has a deck length of 21.75 inches
- It has a deck width off 8.0 inches
- It has a 7 ply maple Element deck
- It has Allen hardware
6. Baker Complete Skateboard Review
Andrew Reynolds and Jay Strickland, the founders of the Baker brand are most loved by many street skateboarders and that has made this one of the most popular stree skating board in the world.
They introduced their product with popular CCS wheels with a 54mm size. These sturdy 100a wheels provide a smooth ride on rough surfaces, making it an ideal choice for street and park activity. These manufactured wheels are a safe option, however, you are always open for any kind of system upgrades. So there is a good chance that by the time this best skatebaords review article is online, Baker will have already made an upgrade to their complete skateboard.
Made up of the top-notch quality of 7 ply maple wood, this deck will provide you ample durability along with an extreemly cool look.
Many BAKER BOY SKATEBAORDS AND VIDEOS HAVE BECOME HOT COLLECTORS ITEMS
Key Features of this Skateboard
- Comes with 5 ABEC bearings
- Has a maple wood deck with 7ply
- Uses raw trucks
- Has a standard deck length
- Has a deck width range of 8.25 inches – 9 inches
- Runs on 52mm wheels
7. Landyachtz Dinghy Cruiser Skateboard
Landyachtz Dinghy reaches my top list as a mini-cruiser board. This board deserves a separate article for its numerous skateboarding perks.
Manufactured using the top-notch products, this complete skateboard setup can be used by both beginners and professionals riders. Although, on the downside, you may feel the loosening of the truck, which can be adjusted as per your preference.
With a medium concave kicktail feature and a nose, this skateboard provided excellent stability. The trucks provide maximum efficiency with dine bearings making it quite a durable and reliable product. I can vouch for it as a friend of mine has been riding it for a decade now.
Not only you can cruise on it, but enjoy this portable deck’s efficiency and outlook.
Key Features of the Landyachtz Dinghy Cruiser Skateboard
- It has a wheelbase of 14.6 inches
- It has a length of 28.5 inches
- It has a width of 8.0 inches
- It has a wheel size of 63mm
- Consists of 4inch 2 bear trucks
- It comes with 7 ABEC bearings
8. Birdhouse Complete Skateboard Review
Tony Hawk, the founder of Birdhouse, managed to pull off a reputation for his brand with great pre-build-ups and solid designs.
Specially designed using 101A wheels, this skateboard serves a great deal for skateparks. With maximum performance and high speed, this skateboard allows smooth sliding but may not work for longer distances.
Balance your skateboard flipping tricks with its concave deck, making it an ideal choice for your experience. These decks are manufactured using quality components like epoxy resin glue and maple wood ply for their concave and identical shaping.
With CCS compliant trucks and fine bearings, you can use these premium decks for a decent start. It has a value price for its width range that is 8.0 inches till 9.75inches.
Key Features Birdhouse Complete Skateboard
- 7ply Maple wood is used in manufacturing
- Has a deck width of 8.0 inch to 8.25 inches
- 101a wheels are used
- CCS trucks
- Concave shape
9. Arbor Oso Foundation Skateboard
The Arbor Oso Foundation Is a brilliant cruiser that cannot be skipped. After producing it for the first time, it felt quite good as I stepped on its deck. Although it was a bit too tight for me personally, it comes with adjustable trucks that can be when manipulated for your comfort and preference.
It comes with a wider deck range, allowing you to easily balance your riding stance. This remarkable deck comes with stability even if you do not place your feet on the right part – won’t make much of a difference based upon my experience with this board.
It comes with great-looking, amber-colored smooth wheels, which complement the trucks of this deck. It has a huge kicktail, giving it more of an old school feel. In fact, it’s steeper tail allows you to have a tough stance as per your convenience. This is a great board for an adult that wants to learn skateboarding for the first time.
It comes with a greater width of Paris trucks which are a better option as compared to other cruiser boards. You will be delighted to find out that Arbor managed to provide these skateboards with a fast bearing system for curbing and high-speed cruising.
The best part is, This complete skateboard sector comes with hard, small wheels that are compliant with bowl and pool skating. This is one product that you will not regret purchasing as it outperforms all other products you can equally compare it with.
Key Features of Arbor Oso Skateboard
- Made from 7 ply maple wood
- It used 80a wheels
- It has a stiff flex level
- It has a wheelbase of 14.5 inches
- It has a width of 9.5 inches
- It has a length of 31.5 inches
- Comes with a spray-on, clear grip tape
10. Alien Workshop Skateboard Review
The Alien Workshop is yet another famous brand that made my list. It comes with 100a wheels making it an ideal choice for commuting and a good run on as a street skateboard. In fact, it will deliver efficient functioning when used in a skatepark too.
Although you may not be happy about the fact that it is not an ideal choice when it comes to cruising. Its wheels and trucks are CCS certified, nevertheless, you can always upgrade its component as per your liking.
It comes with a wheel size of 52mm, which may not provide the best possible comfort on rough surfaces, however, it is great for pulling off technical tricks. It is a good option for park skating. If you want, you can also opt for it’s a smaller size which has an almost 7.75 inches width
- Has a 7 ply maple wood deck
- It has a deck width of 7.75 inches till 8.0 inches
- It has a wheel size of 52mm
- CCS compliant trucks
- Best for rough surfaces
11. Blank Maple Complete Skateboard
The blank skateboards can be purchased for a minimum of $15 in bulk from the best-trusted seller website, however, at times they might be misinformed. Well, the good news is this blank me feel complete skateboards setup does not have a similar reputation. With CCS certification this board is made using the top quality products like 7 ply maple wood for its deck; with numerous pops and a medium concave shape
It has a wheel size of 52mm, while it specifically uses 100a wheels for providing a smooth experience on rough surfaces. This is a highly recommended skirting board for using it in parks and street skating. In fact, you can easily use it to pull off a list of contracts. In the case of small ramps, you may require to give it a harder push.
If you wish, you can always resort to customization as per your style by upgrading the trucks on the wheels. If you are on a budget and wish to have a remarkable product, then this board should be your ultimate choice. However, if you are looking for a more fancy appearance then you can add a few stickers on the trucks. Avoid adding any stickers on the tail or on the nose, otherwise, it will make your sliding a difficult task
- The deck is made from 7 ply maple wood
- It has a 14.375 inches wheelbase size
- It has a width range of 7.5 inches to 8.5 inches
- It has a length of 31.4 inches
- 100a wheels are used
- The wheel size is 52mm
12. POSITIV Team Skateboard Review
After numerous internet and amazon reviews, I could see that this complete board is a complete joy to people all around. Although, I’m still a bit skeptical as these reviews were often posted by various grandparents and parents, who gifted the skateboards to their loved ones – making it a bit hard to rely on
This finally got me into purchasing this product and finding it out for myself. I found the board quite a fair deal for its current cost. This skateboard is a great deal for beginners, however may not be an ideal choice for hard-core professionals skateboarder.
They consist of decent wheels and fine holding for the trucks – all of that at a quite cheap price. Although, you may want to avoid jumping on about six or more stairs. The board uses 99a wheels, which are neither way too soft nor extremely hard, making it an ideal to function in parks and on the streets. Manufactured by Mini Logo, this product won’t disappoint you considering the price.
Nevertheless, you can always opt for upgrading the components for a better quality product to have a completely different experience. This is not my favorite board, but it offers such a great value for the money you invest I have do include this board on my list.
- Has a wheelbase of 14.37 inches
- Has a width of 8.0 inches
- It has a length of 32.125 inches
- Its truck width is about 7.625
- It uses 99a wheels
- The wheel size is 54mm
- It’s bearing are fine
- Made up of 7ply maple deck wood
Pros and Cons of Buying a Complete Skateboard when upgrading from a Walmart Skateboard.
Buying a complete is a good option for a srious beginner or experienced rider. Most skateboarders with not much experience are very intimidated with all the options available and with good reason. One of the great things about skateboarding is that you can learn, practice, and get educated on the sprot at your own pace. The only problem you can have with buying a complete skateboard is over all quality. We stand behind the skateboards we have listed here. If you want to invest several hundred dollar in a board you find better parts and have a custom board done, but for 99% of skateboarders that is just over kill, and not needed.
At the bottom of this page are a few suggested custom setups with high-quality components. Most of them are better than the competes that are listed on top of this page but you have to assemble your own board. For some people they get into that, but for most of us, we just want to ride a quality board, have fun and improve our skills. Tinkering with parts is not in most people’s wheelhouse.
Completes usually have top quality decks but the rest of the parts are of lesser quality. Often the trucks come from unknown brands and don’t last very long once you start to do some more advanced stuff.
Wheels are often made of low-quality polyurethane and may flat spot more easily. Higher quality wheels sometimes cost twice as much but last 4 times longer.
Bearings are often cheap and most complaints with completes have to do with the wheels not spinning properly or blocking, it’s because of cheap bearings. Good bearings aren’t even that expensive.
Again if you go with the completes we have listed above, you will be pleased, beyond that BUYER BEWARE as they say.
Don’t get a complete skateboard when you seriously think you’re going to skate for hours and hours at a time. You’ll get a pro deck but the rest of the parts are usually not the best. It won’t be long until you have to upgrade parts and you’ll end up paying more in the end. Here are some of the other issues people experience when buying cheap skateboards.
- Problem: Trucks are too loose or too tight. Solution: Tighten or loosen the nut on the kingpin.
- Problem: Wheels not spinning or blocking. Solution: Take out the bearing and see if it’s damaged. Apply Bones speed cream.
- Problem: Twisted deck. Solution: Return the board. I know it is a hazzle, luckily all the complete skateboards we have listed on our Top boards list above are on Amazon and can be retutned without needing to fight traffic to a store.
In order to get the most out of your skateboard check out my post on how to keep your skateboard performing in top notch shape. One thing to remember is to store it in a dry place and never ever leave it out in the rain. Please don’t be that kid!
How to Pick the Right Skateboard Parts
Yes, each board we listed above can be upgraded and customized if that is something you decide you want to do in the future as your become more knowledgeable. They can be ugraded right now as far as that goes. For this, you need to educate youreself a little so you can get the best compatible parts at a fair price.
Sure, assembling yourself is usually more expensive but when it comes to quality you get the best stuff. Also, you need to put them all together but I’ve got you covered, it’s really not that hard. Check our our article here at the InternationalSkateboardersUnion.com on how to assemble a skateboard once you picked all the right parts.
I always advise to go to your local skate shop (not Zumiez) and ask for help. They love giving advice according to your budget. There’s nothing wrong with asking and they can go on and on about wheels, trucks, bearings, and boards.
If you don’t have a skate shop nearby, buying online is a good option. It’s important that think about what you’re going to use your skateboard for so you can pick the right parts. Mainly wheels are the culprit here, but let me break it down for you.
Step 1. Pick a Style
Make sure you know what you want to ride and where. There are different setups available for different styles.
Step 2. Picking the Right Size Skateboard Deck
All these boards and brands and often awesome prints, what’s the difference? The truth is many skateboard decks come from the same manufacturers. There’s a difference in how some of them are pressed but the most important thing is to get a board that isn’t pressed in large quantities. Sometimes decks are pressed 10 at a time which causes inconsistencies in the concave, you don’t want that!
Blank decks are a good example, many claim their blanks are quality Canadian maple wood but be careful here. Sure shipping wood to China and having them pressed a dozen at a time makes them real maple wood skateboards. Even if that were the case, shipping causes the boards to damage because of heat and moisture. Avoid these if you don’t know what and where to buy (again, visit your local skate shop).
Alright enough talk, let’s get to the decks which are made of the good stuff. The only thing you need to know is that 8.0″ is the standard for street skating and you need trucks that fit. Wider decks between 8.25″ and 8.5″ are better for transition skateboarding (parks and ramps) because they provide more stability. This doesn’t mean you can’t skate street on an 8.5″, actually a wider deck is great for beginners!
I’ll leave that up to you. If you’re still confused, don’t worry I’ll list a few setups at the end which fit exactly what you need.
Step 3. Trucks That Match the Width of Your Deck
Trucks are the most vital parts of your setup. I’m going into a couple of reputable brands here which all are great choices. Sure there are differences between Venture, Independent, and Thunder trucks but all of them are great! Also Tensor is a great brand to pick and the actually have the record for the lightest trucks.
Ventures provide stability, Indys are a bit more carvy and Thunder is a good choice for street because they are a bit more responsive. I skated transition on Thunders for years before I moved on to Independent and I do like them.
Still, it’s all about personal preference, though Independent trucks are more durable. So economically that would be the best choice. Sure you pay a little extra but they outlast cheap trucks by a factor of 5. I recently got Indy titaniums, and my age I probably don’t have to buy new trucks ever again (sigh).
As for the fancy stuff like titanium, it really doesn’t matter. Some trucks have titanium editions but it’s just the axle and kingpin. The rest of the trucks are still made of a mix of composites. If you want to know more about trucks check out my extensive guide.
|Skateboard deck width||Truck axle width|
|7.75 inch to 8.0 inch||7.75 inch / 197 mm|
|8 inch to 8.5 inch||8.0 inch / 203 mm|
|8.5 inch to 9.0 inch||8.5 inch / 216 mm|
|9.0 inch to 10.0 inch||9.0 inch / 229 mm|
|10 inch or more||10.0 inch / 254 mm|
Step 4. Picking the Right Wheels
So many wheels, it’s intimidating when you browse for and see what’s out there. Again, not a big deal as long as you know what you want to do and where you ride the choice is pretty easy. Spitfire classics are a great choice, Bones wheels are on par and for just cruising and tricks 54mm – 96A Ricta Clouds are a great choice. You can check out this article on Skateboard Wheels, where we get into much more detail.
Step 5. The Right Bearings
There’s still only one brand that manufactures the best bearings for skateboarding, and they have a great reputation in the skateboarding community. Bones bearings come in different price ranges but as long as you’re not planning on extreme speed dow hill, all you need is the Swiss steal types. Get the Bones Reds Swiss package but be careful not to buy any fake China stuff.
I see knock offs being sold everywhere even in skateboard shops.
You will read on some skateboard blogs about ABEC ratings ignore that, the ABEC rating has nothing to do with skateboarding, it’s for machines that need to be able to run 24/7 and should be ignored by skateboarders. Some bloggers like to show how smart they are and in doing so reveal their absolute ignorance.
You can go for the cheapest Bones red bearings if budget is tight or go for a higher grade and they’ll last you for ten years, maybe even longer. Make sure to clean them a couple of times a year to get the most out of them. Proper maintenance can triple their life span, oh try not to skate in the rain. It will kill your bearings.
Step 6. Grip Tap, Hardware, and a Skate Tool
Most shops will apply grip tape and you get free grip tape as a bonus. Standard grip tape is fine but fancy prints aren’t always the best. Some tape will come off because of poor quality so don’t go shopping for too fancy stuff unless you don’t mind replacing it when it peels off.
Applying grip tape yourself is a bit tricky but using the right tools makes it a lot easier. You can check out our article and video on how to apply skateboard grip tape here.
You need hardware for your trucks and they need to be the right size. It’s not complicated. The bolts and nuts to attach your trucks come in sets of 8. If you don’t plan on buying riser pads or shock pads go with 7/8”. Get 1” if you want 1/8” risers/shock pads.
Make sure to get the right size hardware, it’s quite frustrating to get all parts and you totally forgot to order hardware. If they’re too tall you could shorten them, but it will leave sharp edges, that you probaly don’t want or need to think about.
Setup for Basic Everyday Skateboard
As promised here are a couple of setups to choose from. You can pick your own stuff of course but at least it will give you an idea of what works together. You can pick different wheels, trucks and pick a deck of a brand you like but just make sure they are the right size.
If you don’t have the right tools at home, consider a skate tool to assemble the parts.
All-Around Beginner setup
If you don’t know what style you prefer, are new to skateboarding or just want something that works for all styles, go with this setup. The 54mm spitfires are 99A on the durometer scale which is great for both street and park skateboarding. The deck is 8″ wide which is about the average width people skate and the Indy trucks will last forever. Standard Bones reds including spacers, grip tape, and hardware to attach the trucks.
SIMPLE BASIC SKATEBOARD BUILD SUPPLIES
If you get out your calculator you can see that a simple skateboard build will have you investing around $193.00 based upon our recommendations above. This is really about as cheap as you can get buy with. So that is why many newbie skaters who want to upgrade their board start with a pre-assembled Baker, Birdhouse, Eleminator board or one of the others listed above and then over time add Bones Bearings & Wheels etc. to the board.
Most Common Skateboard Questions
Q: Do all bearings fit all skateboard wheels? A: Yes, it’s all standard sizing so you don’t have to be concerned about that, just make your choice and you will be ready to roll.
Q: Why do different skateboard truck brands classify sizes differently? A: There isn’t any standard unfortunately but the axle widths are always mentioned so check if that matches your deck that is the only way to know for sure what you need.
Q: Does it matter if my trucks don’t align perfectly with my deck? A: No, it really doesn’t matter just don’t go overboard. It looks a bit strange if your trucks are way wider or shorter. That’s all, nothing to worry about as a beginner, that is why you see so many odd looking boards when you are at the skate park.
Again as is so many things in skateboarding it really comes down to individual choice. Weather you decide to build out your own skateboard or invest in one of the pre-assembled boards we have reviewed, we hope the information we have shared has provided you with the informaiton you need to now make the best decision for you, and your situation.
Never Stop Skating!
Skate Park Setup
This is a bit of a wider setup that is excellent for parks and transition skateboarding. The wider deck provides lots of stability and the Indy trucks are great for turning. The larger Bones Skate Park Formula wheels are the best wheels for parks, I personally love them and so do most of the pros.
A selection of cruiser skateboards if you want a calm and comfortable ride and don’t want to do any technical tricks. You could also consider buying a regular setup and slap some large 6omm wheels and 1/4″ riser pads on them.
Heavy Riders Setup
If you’re bit heavier or taller this is a setup that can take an impact. I picked one of the strongest boards available and top-notch trucks that can handle more weight.
Mini Ramp Setup
Great setup for mini ramps, you can either go with 58mm wheels or 56mm. This is the setup I ride when I’m at my local mini ramp.
Q: Do all bearings fit all skateboard wheels? A: Yes, it’s all standard sizing so don’t worry about that.
Q: Why do different skateboard truck brands classify sizes differently? A: There isn’t any standard unfortunately but the axle widths are always mentioned so check if that matches your deck.
Q: Does it matter if my trucks don’t align perfectly with my deck? A: No, it really doesn’t matter just don’t go overboard. It looks a bit strange if your trucks are way wider or shorter. That’s all, nothing to worry about as a beginner.